-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| Keithc8 |
11-02-2003 07:26 PM |
428/428CJ Blocks Available
We have several 428 and 428CJ blocks available for engine build ups. Have one NOS 428CJ block also available as well as some that wil make a .020,.030 and .040 over. These blocks mixed with a Scat 4.250 cast steel crank will make 460 to 465C.I. We have used these combinations to build some customers 600ft/bs tourqe and 600HP crate engines on pump gas. We can build these engines for about 10,000.00. This makes a nice and economical Cobra engine. I believe we have about seven blocks available at this time.
|
| All times are GMT -7. The time now is 07:13 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
