-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| Keithc8 |
11-30-2003 12:13 AM |
To Dyno Test New Genesis Aluminum Block
We have completed the machining and building of our first engine using the new Genesis aluminum block. This is a 482 cubic inch FE. This is a pump gas 10.6 to 1, hydraulic roller, Edelbrock Performer RPM combination. Hope to run the engine on Monday or Tuesday and we will keep you posted on the results. Thanks Keith
|
| REDSC400 |
11-30-2003 04:41 AM |
Hey Keith, that block sounds interesting. Can you tell me more about the main bearing webs and caps? Are they "beefed" up or supported well and are the caps 4 bolt or 2?
Also, what type of crankshaft will you be using as well as connecting rods and cylinders?
|
| Keithc8 |
12-01-2003 09:27 PM |
The block looks real good and has the standard 1/2 main bolts and bigger 7/16 cross bolts for extra strength. The engine had a Scat cast steel crank, Scat 6.700 rods and JE pistons 10.7 to 1. Edelbrock Performer RPM intake and one of our hydraulic rollers. The engine made 675HP and 650ft/lbs torque.
|
| All times are GMT -7. The time now is 07:06 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
