-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
428 compression
(
http://www.clubcobra.com/forums/fe-talk/51820-428-compression.html)
| goodold71 |
03-20-2004 09:18 AM |
428 compression
How can I build a 428 to run on 87 octane ? I want to build one for a 4x4 truck and most were high compression...I need the torque and low compression.
|
| Rick Parker |
03-20-2004 09:33 AM |
Find someone that makes dish pistons, may need to be custom made. Compression will need to be about 9:1.
Good luck
Rick
|
| CJ428CJ |
03-20-2004 11:56 AM |
Post the same question at www.fordfe.com. A lot of the guys on that site run FEs in trucks. |
| All times are GMT -7. The time now is 11:50 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
