-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| jared1970 |
04-15-2004 01:27 PM |
428 Intake, with Edelbrock heads
I'm building a 428 with the Edelbrock RPM heads. I'm planning on driving this car a little on the street, but mostly looking for dragstrip performance. I'm planning on shifting at 6500 with a C6. I haven't yet selected a cam or converter. Would anyone care to make some suggestions on intake manifold choice given what info I have provided?
|
| CJ428CJ |
04-15-2004 06:42 PM |
I'd consider the Edelbrock Victor manifold if you have room under the hood.
Chris
|
| Keithc8 |
04-15-2004 10:08 PM |
Intake and Head selection
For the rpm range that you will be operating the engine in and with the automatic transmission I would use the Edelbrock Performer RPM and a our stage 2 head work. The cylinder head work would cost you 800.00 and this includes stage 2 CNC porting and competition valve job and heads re-assembled properly. I would recommend a hydraulic roller camshaft and an up-grade valve spring. Good luck Keith
|
| jared1970 |
04-16-2004 09:48 AM |
Who offers these Stage 2 heads? I just got my short block back from the engine shop, and haven't done a lot of research yet on what's available. I'm trying to work as much overtime as I can to save up for the heads, etc (don't want to borrow money for the build up). Anything you guys can advise me on would be appreciated. This is my fisrt FE. A good friend of mine is helping me on the build, he's an expert on original FE parts, but doesn't know much about the new aftermarket stuff.
|
| All times are GMT -7. The time now is 07:45 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
