|
Oval Air Cleaner Assembly
A quick question to all,
I am in process of replacing my air filter element on my oval Cobra logo air cleaner assembly and have a question. I know that there was a thread a while back about replacement elements for these but am unable to find it. What is the OEM (Motorcraft) part number? Also, I have found 3 K&N filter numbers that are approximately the same size and would like to know if anyone had found/used these on their application. The K&N numbers are E-1960 (1.8" tall), E-1963 (3" tall) and E-1966 (6"tall) I do have the under hood room for a 3" filter and am leaning the way of the E-1963 but am requesting input first for the Motorcraft number first so I can get a baseline. I realize that Tony Branda sells these, but I am interested only in the Motorcraft number at this time. Thank you. John |
M-9601-A302
|
John - I use the 1.8" tall K&N filter on my oval air cleaner because of headroom limitations - fits just fine, no restriction at WOT that I could see on a vac guage.
|
Wilf,
You used the K&N # E-1960? Does it fit the base okay or does it sit on top of the flange? The reason I ask is because I have measured my paper element that I have and the oval is a little smaller than the measurements in the K&N book says the K&N one is. Where did you get it and what was the cost? Thank you. John |
Sits just fine on the base. However, remember that I am using an oval air cleaner supplied in the UK. Could differ from those available in the US, although I suspect they are all pretty much the same. Pics in my gallery here.
I got my filter through "Demon Tweeks", a UK tuning parts outfit. They special ordered it from K&N for me. I honestly can't recall how much it cost - if it is important to you I could look for the invoice? Remember that my cost would be in ££s, not $$s. |
The Motorcraft number is FA48.
|
if you use solid motor mounts you can use a much taller filter with out it hitting your hood , also off set the filter 1.25 inchsd to match the off set of the motor. most Cobras starve for air.
|
| All times are GMT -7. The time now is 11:48 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: