-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
FE Motor Mounts
(
http://www.clubcobra.com/forums/fe-talk/58137-fe-motor-mounts.html)
| Nantucket427 |
10-20-2004 02:23 PM |
FE Motor Mounts
I am pulling the engine and making some changes with the help of this forum but I don't know what I can do for New Motor (427 FE co)Mounts ?:JEKYLHYDE
I have been over most of the old post looking for a solution. I checked with my suppliers and none of them have a good solution. I don't want to re-invent the wheel here. HELP !
|
| SCOBRAC |
10-20-2004 03:28 PM |
Any good auto parts house has 427 motor mounts. They can be found here by part number by searching 427 motor mount. I'd give you the number but my Palm ate it taking 3 years worth of Cobra data with it.
If that fails I saw a guy with 19 pair on e-bay. They looked really nice (not off shore crap) for $32. each.
|
| SCOBRAC |
10-20-2004 03:36 PM |
|
| FFR428 |
10-20-2004 06:03 PM |
Well I see you have a SPF. Don't they have the mounts available? Are they the same as the OEM ones? G.
|
| Jack Zupan |
10-20-2004 08:36 PM |
The part numbers are 2240 and 2241. You can buy them at most any parts store.
Jack Z.
|
| Michael C Henry |
10-20-2004 09:40 PM |
The mounts don't care if it is a 352 ,390,406, or a 427 . what design are your mounts now? one style goes from 50's through 62 two bolts into engine and two studs into the frame each side. somwhere in 63 they changed to a flater three bolt pattern on the engine and one (I think) into the frame . I'm not sure how long that style lasted as I could not afford that new a car at that time and then I got married and It didn't matter.
|
| SCOBRAC |
10-20-2004 10:10 PM |
2240 and 2241 thanks jack... Now only 23,901 other part numbers to re-input into my Palm.
|
| Tex Allen |
10-21-2004 06:03 AM |
I just purchased a set of motor mounts for my Superformance with a 427 Genesis block. I got them from Southern Automotive for about $31.00. I think the brand of the mounts was by Pioneer. They seemed to be well made and fit in the car without any problems. Be sure to get the correct stands form mount to frame from Superformance.
Allen
|
| Michael C Henry |
10-22-2004 11:32 AM |
I did a search earlier when I changed my mounts to see if there were new and improved materials.Ended up with OEM.But I did make some heatsheilds to keep the header heat from the mounts.
|
| All times are GMT -7. The time now is 07:31 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
