Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   EFI - Distributorless Ignition (http://www.clubcobra.com/forums/fe-talk/60030-efi-distributorless-ignition.html)

DonC 01-29-2005 07:46 AM
George:
That's really a good looking part. Please keep the information flowing so those of us who have future plans for this type of system can continue to drool.
DonC

GEORGE ANDERSON 01-29-2005 08:03 AM
We are going to build an aluminum cover so the black MSD top isn't so visible...

George

GEORGE ANDERSON 01-31-2005 10:37 PM
More updates...1/31/05

http://www.gessford.com/cobra/images/Cam-Sync-05932.JPG


http://www.gessford.com/cobra/images/Cam-Sync-05933.JPG

Dennis Mosley 02-01-2005 06:19 AM
Thanks George! Just what I was looking for! I look forward to getting it.

GEORGE ANDERSON 02-01-2005 09:52 PM
Dennis...two final installed images...

http://www.gessford.com/cobra/images/Cam-Sync-05937.JPG

http://www.gessford.com/cobra/images/Cam-Sync-05939.JPG

Ken Oikawa 02-02-2005 06:56 AM
Hi George;

Very nice work. Is the sync sensor Hall effect or magnetic sensor?
Could you build one for me too? You can PM/email me or reply here.
Thanks,
Ken

GEORGE ANDERSON 02-02-2005 09:27 PM
Ken...you have mail on the magnetic position sensor MSD 2347.
George

Ken Oikawa 02-03-2005 05:46 AM
Hi George

Thanks for the PM. Have read it and will get back to you asap.
In my gallery there is a small picture of my FI setup for a TP.

Ken

SteveC 11-11-2006 01:45 PM
M/T cross ram dist ext
 
Quote:
Originally Posted by James Baldwin
Who here is using a distributorless ignition (coil packs)?

I am looking for someone who produces a distributor plug that runs the oil pump (and possiby serves as a cam sensor). Does anyone make such a thing before I begin butchering my MSD Distributor? :)

James-
Did you ever find the distributor extension? I've got one, but I'm using it. My engine is apart right now so I could give you the dimensions of the spacer and oil pump extension. Did you ever have any luck finding a distributorless ignition? I also have the specs for modifying the distributor itself.
Steve


All times are GMT -7. The time now is 07:54 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: