-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
needing 390 block
(
http://www.clubcobra.com/forums/fe-talk/60525-needing-390-block.html)
| eddieross43 |
01-13-2005 11:48 AM |
needing 390 block
help!
need 390 or 360 or a 406 bare block...even one that needs sleeve...my 390 has a crack.....don't know how? in lifter valley?????i live in arkansas.....any help thanks ed:CRY: :CRY:
|
| blykins |
01-13-2005 02:24 PM |
You willing to ship? I have a C7ME-A block....been magged, sonic tested, media blasted....will go another .060"...no sleeves.....
|
| SCOBRAC |
01-13-2005 02:54 PM |
If blykins block doesn't work out look up Randy Ritchy (RRitchy) here in the forum. He's in Fayetteville and will find you one.
|
| rritchey |
01-13-2005 05:58 PM |
Thanks scobrac -
Eddieross43 - I replyed to your e-mail. If you are wanting to salvage your existing pistons, let me know your current bore size and I'll get you one that will finish out at the same bore. If you are wanting a fresh start with a complete rebuild I'll grab one that cleans up at .030
|
| Timmy |
01-13-2005 06:31 PM |
Eddieross43- I also replyed to your email.
Tim
|
| SCOBRAC |
01-13-2005 07:29 PM |
If Randy can't help you I have a 390 std bore PI service block that will clean up at .020 but you could easily take out to 4.13 to net you a 406. It has the reinforced crank saddles and high nickle content. It has been shot peened and mag tested, no cracks, damage or stripped or damaged threads.
$500. (what can I say it's california)
|
| All times are GMT -7. The time now is 01:25 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
