-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| bulletbrown |
01-26-2005 01:37 PM |
Dave, I was beginning to think I was the only one who felt the same way. If you reread the theads, if you fix, cut, remake it works just fine???
|
| relaxinrob |
01-26-2005 01:38 PM |
I don't recommend doing away with the second master cylinder.....it's nice to have the redundancy built in......we just found that getting rid of the balance bar and millig a brass bushing to fill the void of the pedal with a rod running through it to connect directly to BOTH master cylinders. Put a proportioning valve on the back one. This setup really gives you great brakes.
|
| bulletbrown |
01-26-2005 01:42 PM |
Relaxinrob, I believe that is the way to go
thanks Bob
|
| flipper35 |
01-26-2005 03:07 PM |
I didn't have anything to do other than replace the bearing that wasn't as smooth as it should be. Mine works great, but it is 10 years old, maybe they changed something in the mean time. Came from the factory dimentionally very similar to the Wilwood pedal setup. Can adjust the bias over a very wide range.
|
| All times are GMT -7. The time now is 03:51 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
