|
427 hydraulic cam suggestions
Building up a street 427 Genesis. Pump fuel Edl. Alum heads, 750 demon ect. What do you guys think for a hydraulic cam. Comp cams offer a "choppy idle" dual energy cam, 2-,6000 rpm that many builders use. Your suggestions or experieces are welcome.
Thanks, Mark |
enginetime What compression are you running?? Crane has a nice cam 533-566. little lopey idle great mid range tork. Will pull to 5200 rpm 460 tork 360 hp. Pump gas with out any problem. The car with 3.31 gears will run 12.7 in the 1/4 mile stock side pipes. 501-533 crane is the one I started with, 12.9 in the 1/4 mile. smoooooth idle with a very small lope. 328hp 448 tork with a 452 motor 9.2 compression retarded the cam 4 degrees. Light the tires in 2nd gear for your friends. Strong lowend tork. Cam is done by 4800 rpm for the power band but will spin to 6000 rpm no problem but is flaten out. Good luck Mark. Get a cam that matches your intake, heads, exhaust. Bigger is not always better for the street. Rick Lake:)
|
Running 10.5:1 compression, edlbk performer rpm, 76 cc eldbk heads. Looking for streetable yet 2,000-6,000 power band for fun!
|
| All times are GMT -7. The time now is 08:28 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: