|
Intake I.D.
I have a '67 427 sideoiler, my question is the intake. It is a Medium rise 2 x 4 aluminum setup. The only thing I see are castings of the firing order and "FoMoCo", no part No# at all on this intake. I thought Ford had No# on everything. I am pretty sure the intake matches the engine as far as the year and all. Any body have a clue.
Thanks, Glen B. Midstates owner |
Glen can you post a picture of it? My book lists 3 Alum. Medium rise : C6AZ-9424-M Bore Diameters 1.78x2.50 Oval, Port size - Width =1.24 Height = 1.94
C8AX-9424-A Bore Dia 1.72 All, Port size - Width =1.24 Height = 1.94 C5AZ9424-G Bore Dia 1.72 All, Port size - Width =1.24 Height = 1.94 |
I posted Pic. in my gallery, I have Width @ 1 1/4"
Hight @ 1 15/16" I'm not sure what Bore Dia. I need to take? Are you talking cylinder bore, or something on the intake? What books do you have and are they worth getting. I have an old 1966 Ford repair book, but it's no good on the '67 Thanks, Glen B. |
Sorry, I had a brain fart - I know what Bore Dia. to look at!
I will have to pull the Carb, but if it's not Oval how can I tell if it's a C8AX or a C5AZ. Not that it should matter other than information. I can't see horsepower differance can I. Thanks, Glen B. |
Have you looked for a date code on the intake? Some not all have them and this might clue you in to ID it. I have a lowriser 3x2 intake the same way. Just the firing order and the Fomoco logo. No date code to speak of either. Just a thought....G.
|
Glen my money is on C5AZ, take off a carb and see if its a dual plane (C5AZ) or a single plane, with individual-runners. Two of my favorite books are High Performance Ford Engine Parts Interchange and Ford Performance from Cartech. http://www.cartechbooks.com/
I'm sure some of the guys here in this forum might know some that might be better but I lucked into these visiting my local bookstore. |
C5AE 9425... G maybe... Sorry my part number is polished off. It's a 1966 427 medium rise intake. It is a dual plane intake. Perhaps the best flowing intake Ford made for the street.
|
| All times are GMT -7. The time now is 05:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: