|
The right cam for a 390
I recently had to pull my 390 out of my Cobra. It is running a mild cam with hydraulic lifters. I was thinking about changing it to a solid lifter cam with roller lifters. Does anyone make this combination that is not real radical? Thanks in advance.
|
Check out comp cams website. What you may want is something in the 230 dur at .50 and 550-570 lift with 106 degree center. Comp makes a complete kit with springs, lifters, cam, and pushrods for a fair price. Be sure and change your timing chain while you are doing the cam swap.
Clois |
Crower!
I love my Crower Street Roller.
Crower 280R "Street Roller" Part Number/Work Order Number 16462 Engine Application 332-428 FORD Grind Number 280R |
| All times are GMT -7. The time now is 07:15 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: