Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   OT – Chassis Dynamometer in Atlanta Area (http://www.clubcobra.com/forums/fe-talk/64279-ot-chassis-dynamometer-atlanta-area.html)

DuckRyder 05-11-2005 05:29 AM
OT – Chassis Dynamometer in Atlanta Area
 
OT – Chassis Dynamometer in Atlanta Area

Does anyone know of a good Chassis Dyno in Atlanta with some experience tuning Holley carburetors?

I would like to optimize fuel and timing curves and get some horsepower pulls.

Anyone dealt with Balanced Performance?

Mike Simard 05-11-2005 08:18 AM
This would be a good question to post in the Atlanta forum. Tony Radford has found someone who does carb tuning on a chassis dyno. Balanced Performance probably isn't the best choice if you want to dial a carb in, they do have a box of jets lying around though. They're a bit pricey.

DuckRyder 05-11-2005 12:59 PM
Quote:
Originally posted by Mike Simard


This would be a good question to post in the Atlanta forum. Tony Radford has found someone who does carb tuning on a chassis dyno.
Do you mean the "AC Cobra" Forum under clubs? I looked for a "regional" forum and couldn't find one, must have missed the "AC Cobra" forum.

I've got a box of jets :)

Tony Radford 05-11-2005 05:04 PM
Robert, I needed the same thing after my new Demon was drowning my motor. I ended up going down to All Speed in Peachtree City. They did a great job (many pulls) and got me an additional 35 HP in the process. They've got a very nice, modern shop with a Dyno 2000. They were much more "reasonable" than some of the other shops I called. I've heard Balanced Performance does a good job as well, but I was having a hard time scheduling a Saturday procedure (and I was a bit impatient).

DuckRyder 05-11-2005 07:05 PM
Thanks Tony, PTC is less than 10 miles from me.

Who makes a Dyno 2000? (All google turns up is the program)

DuckRyder 05-24-2005 06:32 AM
Here is All Speeds Website.

http://www.allspeedimports.com/

Seems they have a DynoJet Model 248 (HS) The HS is no longer on DynoJets website, but nomethe less, it is a DynoJet.

Had a minor Rocker arm issue, waiting on parts so I can continue Break in. Once it is broken in, I'll get over to PTC and talk with them / set an appointment.


All times are GMT -7. The time now is 07:09 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: