|
Clutch fork/slave cylinder set up help!
Geatings from the U.K.
I am building a Dax Cobra with a 390 FE stroked to 426ci, Lakewood scattershield and Tremec 600. I am ready to drop in the engine/trans but need advice on what clutch arm/pivot and slave cylinder to use, and where to get them from. I understand that my set up will need a puller type slave mounted on the tramsmission side. Any help would be greatly appreciated. |
There are several brands of slave cylinders that are readily available including Wilwood, AFCO, Girling, and Tilton. Most speed catalogues carry some of these brands. Also, some of the Cobra's around here have found several factory brands that will work and are available through a local parts house. The fork my require a bit more research. The good new is that any FE should work fine (352 cu in - 428 cu in V8). Maybe someone else will have one they are willing to sell you.
Clois |
Got mine at Pegasus Racing. Works well and was easy to fabricate into place.
May I suggest you work out the hydraulic math before you select a master. Just a suggestion. :D |
Try Mike Forte at http://www.fortesparts.com/ he is a Tremec dealer and can set you up. Very good customer service too.
John |
Thanks for the help guys.
I have contacted Mike at Fortes, sent him some pictures of my set up, and he has sent me what I need. |
| All times are GMT -7. The time now is 11:59 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: