|
Reusing Valve Seals
Guys, I purchased a set of Stage 1 heads from Keith Craft...that were custom assembled at his shop. They came with a set of Viton valve seals. They're pretty pliable and have the little metal coil springs around the tops of them.
I changed cams before I started my build, so I had to upgrade the springs, cups, and retainers as well. These heads have never been on an engine. Would it be ok to reuse the valve seals when I change the spring cups? I have already removed them and was extremely careful when sliding them up the valve stem. I inspected them all and the sealing surfaces look brand new. Am I safe....or should I order a new set of seals? I'll be waiting on some responses. I'm ready to put these heads back together this evening. |
I think you'd be ok to reuse them in your situation. I would just make sure you put some grease or other good lube on the tips to make sure they don't damage the seal on installation.
|
| All times are GMT -7. The time now is 01:01 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: