|
Does this look weird to you guys?
Guys, take a look at how far my keepers sit up above my retainers...
Now keep in mind these are both supposed to be 10 degree pieces...but they all set up like this. I've never seen a lock not sit flush....so this kinda has me worried.....I'm afraid that Manley sent me 7 degree retainers in a 10 degree package. Anyone ever seen a setup like this? I am using Manley retainers and Comp locks....different brand match up maybe? I dread taking them apart...it took me 3 days to find a buddy that had a spring compressor strong enough to compress these springs. http://www.clubcobra.com/photopost/d...valvelocks.JPG |
The difference between 7 and 10 degree keepers is quite obvious--10 won't go into 7 retainers and 7 are very loose in 10 retainers and will probably go thru.
What is more a problem is using keepers for the wrong size valve stems--3/8 on 11/32, etc there are also keeper/retainer packages set up for different install heights( +/- .050 install heights) and also keepers for lash caps Hope it helps, but I would take one apart to check it out. Jerry |
These were heads that I bought from Keith Craft. They came with 10 degree retainers and matching locks.
I changed cams, so I changed springs and other components (installed titanium retainers) to match the cam... I reused the locks that cam with the heads.... Both are supposed to be 10's. The valve dimensions never changed. |
They Look Fine,looks Like A Older Ford Set Up,try To Find Some Pics On The Internet Of Older Ford Head Set Up..you Maybe Thinking Your Looking At Your Own Picture You Posted
|
It does look kinda weird. I've tried Comp and Crower Ti 10* retainers with Crane standard 10* keepers, Crower standard and -.05 10* keepers. The keepers were all pretty level with the retainers with these combinations. I know the Comp keepers have machining for the lash caps but don't know if that makes a difference in the way they sit in the retainers. I guess it's a strange way of thinking but I didn't want to get the Comp keepers since they were way cheaper than the other 10* machined keepers and I figured there must be some reason for it and didn't want to chance it.
|
They do look odd. Far too clean and no high speed discoloration. Oh, the geometry looks fine. Go run the things and they will look better:LOL:
|
I ordered a set of Manley 10 degree keepers....since the retainers are Manley. I'll try one of those and see what it looks like.
I just don't wanna take a chance. If one little keeper dies, the whole engine will probably be shot. |
Brent, I posted a couple pics for you on the FE Forum. I don't know how to do that here.
|
| All times are GMT -7. The time now is 05:41 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: