Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Engine Builder? FE with Stack EFI (http://www.clubcobra.com/forums/fe-talk/74308-engine-builder-fe-stack-efi.html)

fkemmerer 11-08-2006 02:51 PM
Engine Builder? FE with Stack EFI
 
I am planning to build a big block Cobra and I am looking for an engine builder who has experience with creating an EFI setup similar to the following:

Aluminum FE side oiler block (Shelby or Genesis?)
Stroker setup - 480 - 500 ci
Stack Fuel Injection Setup (similar in appearance to Webbers) setup for EFI

The engine would be for street use.

Has anyone built a similar engine to this and who would you recommend I work with in terms of an engine builder?

Thanks for the help!

- Fred

Brent Mills 11-08-2006 03:12 PM
Moved to the FE forum for you (was in 429/460 forum). Ketih Craft (http://www.keithcraft.com/) and member thorconst who offers TWM setups (http://www.clubcobra.com/forums/show...630#post625630) have worked together. I'll bet they have an optimal combination that you are looking for.

rick50 11-30-2006 08:58 PM
Quote:
Originally Posted by fkemmerer
I am planning to build a big block Cobra and I am looking for an engine builder who has experience with creating an EFI setup similar to the following:

Aluminum FE side oiler block (Shelby or Genesis?)
Stroker setup - 480 - 500 ci
Stack Fuel Injection Setup (similar in appearance to Webbers) setup for EFI

The engine would be for street use.

Has anyone built a similar engine to this and who would you recommend I work with in terms of an engine builder?

Thanks for the help!

- Fred
Look straight up at the sponsor Keith Craft does lots of FE motors with TWM Induction stacks

pgermond 11-30-2006 09:57 PM
Where are you located?

Blittleton 11-30-2006 10:15 PM
Fred,
Check out our engine builder, Performance Engineering. I have seen some of those type of motors coming out of his shop. His website is www.perfeng.cc Ask for Eric and let him know Bill was talking about him on the forum. You never know, I might get a better deal because of it:D

Bill

RedSnake351 11-30-2006 10:28 PM
Quote:
Originally Posted by pgermond
Where are you located?
We may have lost Fred since it's his first post and then Brent moved it on him.:confused: :CRY:
Hopefully he will look for it and find it here. :)

fkemmerer 12-01-2006 05:56 AM
Alum Big Block FE
 
Thanks guys for all of the information. This is really helpful. Spoke with Keith Craft and they can definitely handle what I'm looking for. Phil, you had asked where I'm located. I'm in south eastern NH.

Commander 12-01-2006 05:45 PM
Michael LeFevers posted this on the fordfe.com board, something he'd been working on:

http://www.network54.com/Realm/Mitech/IM000896.JPG


All times are GMT -7. The time now is 03:06 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: