|
FE engine builders in the NJ area??
I've asked this question over at the ford fe.com website although I wanted to see if anyone here can recommend a good FE engine shop to machine and possibly assemble my 428fe.
Brian |
FE builders
Brain Give John Nafziger a call, He is up in Lafayette NJ He has about 15 blocks in his shop at any given time. (973-579-1818)
|
local engine builder
I sent you an email with info on a local engine builder.
good luck, Karl |
Danbury Competition Engines, Danbury Connecticut, Joe Lapine.
Joe is highly recommended by E.R.A. in New Britain. I have never used him but he has a loyal following. Do your homework. Check out the ERA site. Bob |
| All times are GMT -7. The time now is 11:30 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: