|
Seems like a good buy on a side oiler
Pretty low "buy it now price" on a side oiler.
John http://cgi.ebay.com/ebaymotors/427-F...QQcmdZViewItem |
If it all checks out ok it looks like a pretty good deal. The heads look like there is still a nice thumbprint left. Worth a look see if someone is close enough. BIN price is really good I think for what your getting. Guy seems on the level and has good feedback. If I were still looking i'd certainly look into that deal.
G. |
If I was going to build one I would seriously consider this setup. It's got some GREAT specs, crank, balancer and heads are killer. Personally I prefer the 'service block' because you can run hydraulic or solid lifters, your choice.
It's a good price for the 'package'. |
| All times are GMT -7. The time now is 06:30 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: