-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| 82ACAUTOCRAFT |
05-05-2007 08:22 AM |
Cast iron Genesis block problems!
I hear that there are problems with the latest cast iron blocks, (porosity and alignment) and that Ford Motorsports does not sell them anymore! Any thruth to that?
|
| FFR428 |
05-05-2007 01:15 PM |
There was a recent thread on FordFE.com about it. Porisity issues and some pitting in the cyl walls upon final honing was found. Think the cause was a glue used on the molds that was a releasing agent. Seems to have been deemed the problem. That said my iron Gen block is just fine and was purchased and machined by KCR. There have been some alignment problems that need to be addressed. I'd think most can be handled at the machine shop. Look at some of the oem blocks that had casting problems too. Cam and crank bore alignment, core shift and other things. My hat goes off to these guys for bringing these new blocks to daylight. Tim at Genesis, Robert Pond, Dove and the Shelby guys. Not saying they are all perfect all the time. But nice to have options. The KCR guys did a great job on mine. I haven't seen the blocks in the 07 catalog. 05 or 06 was the last year. I'm sure Ford still gets their cut for the C5AE-H casting number used on the Gen and Pond blocks. Regardless if they sell them or not.
JMO...
G.
|
| kris-kincaid |
05-05-2007 04:33 PM |
Is C5AE-H copyrighted or trademarked? I've never seen a Ford part number listed as so.
Interesting :confused:
|
| Rick Parker |
05-05-2007 05:31 PM |
"ROYALTY" per copy. Much like SCCA did for each Pontiac Trans Am that was produced.
|
| FFR428 |
05-06-2007 07:06 AM |
I beleive the main reason the Ford C5 casting number was added was to make the blocks NHRA stock and SS legal. The C5AE-H casting number was original to the sideoiler. Thus accepted as a legal replacement/upgrade. Then when Ford added them to the FMS catalog they were assigned a new Ford part number. I'm not sure where either side stands now. But that's part of the story as I understand it. I'm sure there is more to it...
G.
|
| All times are GMT -7. The time now is 01:50 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
