|
FE crossram
I came across this today and had never seen or heard of it before. I suppose the linkage would pose a bit of a problem.
http://www.clubcobra.com/photopost/d...fecrossram.jpg |
Just fitting one of those up at the moment, fortunately the throttle linkage kit came with it. Wish I could say the same for the external oil pump, PS pump & alternator all of which are non standard!
Jac Mac |
They're neat if all you want is impressive looks
but they're '50s and '60s technology. A single four of large enough size will far outperform it.
Good Luck, Dan |
linkage is no problem for ERA
Bob ERA will make a linkage for you or you can build one your self. As far as the manifold, Ask Doug or Pete P. but I don't think it fits under a stock cobra hood. You need a paxton hood to clear the carbs and airfilters. Check with the boys first. Rick L. You will make more power with a single plane manifold but the WOW factor when you open the hood,:) :3DSMILE: :D and yes, I did stay at a holiday inn last night:rolleyes:
|
I agree if you have one turn it into a coffee table and run a single four intake with a good 750.
|
I don't think I'd get one, I just never saw one before. I'm sure there are clearance issues for under the hood. I probably will go with a single four at this point, although I love the tunnel wedge 2x4.
|
I'm sure more of you have seen that intake than realize it ;) .
That's the intake the SuperSnake uses. |
Hood clearance issues would be a problem so I wouldn't run it on my Cobra. But I would LOVE to run it on just about anything else, it looks SO cool.
More power from a single carb? Not enough additional power to overcome how boring a single four is compared to THIS bad boy! :LOL: |
Edelbrock Cross Ram
XRACERBOB
Do you have this manifold and if so, would you like to sell it. If so, contact me at: Carroll Shelby Engines 310-538-2914 Thanks Don McCain |
Same setup as the old 426 Hemi & 302 Z28
. |
Is someone is looking for these crossrams for the FE let me know. I know where there are two with their linkages, etc. Just drop me a pm and I'll hook you up with the seller gratis.
Sam |
http://www.clubcobra.com/photopost/d...E_crossram.jpg
Edelbrock crossram (same as the one that started this thread), as converted by Man `A Fre. I wouldn't call crossrams old tech, or old school. If anything, they preceded by decades current manifold design. Just look at any modern intake and you'll see the long tuned runners of the crossram. |
| All times are GMT -7. The time now is 10:59 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: