![]() |
Dipstick Calibration
Need help in determining the proper oil level on the dipstick. I'm running a KC/Pond 482 with a Canton Racing Oil Pan and want to make sure I do not over-add; I'm always looking at oil pressure as well for an additional safeguard... idle ~ 40-45 lbs, at cruise 50-60 lbs.. with Valvoline 10W40
My current oil level is at the add mark just as I received maybe a tick lower... Thanks... |
Call KCR and Ask
Rosco Call and ask KCR what pan they added to the motor. Should be a 7 quart one. If you are running an oil cooler, add 1 quart for lines and cooler. When you get the correct level put a 1/32 drill hole at that level so you know if the motor is burning of leaken oil from driving. Better to be a quart over full than under and going around turns and suck AIR. Rick L. I run my motor 2 quarts over. Talk to KCR about adding a accusump to your car as a peroiler. This will save the motor on dry startups where the most wear and tear is done. I run 1 quart of Lucas oil suppliment to also help stop dry starts on other parts and pivot places. Rick L.
|
thanks Rick L.... Will do...
|
| All times are GMT -7. The time now is 07:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: