|
crane yhdraulic roller cam for fe
is anyone using the crane hydraulic roller cam in there fe part number-349521
if so how is it?, i am just looking at options for my 390 stroker. |
Give me a number to call you at?
wrench 87 Give me a number to call you at or call me 732-254-3536 after 8:00 est Rick L. I have this cam in my 482 motor with the shelby heads and the erson rocker arm set. I am running studs for the shaft assemblies. I have FI system. The car is going to the dyno shop next week for fine tuning. I am guessing the hp is about 430 rwhp and about 490-500 ft of torque to the rear wheels from 2,500 rpm to 6,200 rpm. I am running beehive springs on my setup without any float yet. The motor is new and limited to 4,500 rpm for breakin. In a 390 you will have a lopey idle and strong midrange power. You will lose anywhere from 20-60 hp from you sidepipes depending on the backpressure they produce. :eek: It is a nice stroker cam Chaplin is running one in his new motor. Waiting for his dyno numbers. Rick L.
|
Wrench-
I am using a crane hyd roller in my new motor (472 cubes), but not that one- I thought it might be a little too small for a 472, but Rick used it in his 482 so what do I know?? :) I am using one of their custom grinds that is slightly bigger than that cam, but smaller than their other hyd roller listed in the catalog. There is a really good series of articles featuring a 390 stroker using that cam- it made for a really nice motor. Go to webrodder.com and search for "FE" or "Cobra Venom" and the articles will come up. Also, this link has another good article. http://www.clubcobra.com/forums/show...hlight=hot+rod |
i would like to see those dyno numbers, what are you running for cylinder heads? are they out of the box or have they had work done to them?
|
What do you know???
Chaplin Mike you have 2 kids, wife, house, and a cobra. Even if it is without a motor. Hoping Santa can bring it to you before christmas. Don't know if the sleigh has the room, the wieght should not be a problem.%/ :rolleyes: You have a job that keeps you busy. Here is my side, my house is half the size of yours,I am jobless at this time, the kitchen is work in process, no kids but a puppy that is worth 3,800.00 dollars, she went to the vets yesterday to have a plate and 6 screws put in her R/F leg after breaking it playing wonderdog and jumping over a 2 1/2 foot baby gate. No wife, but living togeather for 18 1/2 years. This started on April 1st. Best of all you get to stay at more Holiday inns than me.:rolleyes: :LOL: :LOL: :LOL: Ps you are getting it more than me also, you have 2 kids to show for it.;) :3DSMILE: :D :LOL: :LOL: Rick
|
| All times are GMT -7. The time now is 11:23 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: