|
comp cams hydraulic roller lifters
i just saw on comp cams site that they now sell hydraulic roller lifters for the ford fe, i guess before crane was the only one who sold them. is any body using them i wonder how they compare to the cranes they are a little bit more money around 575.00 compared to 499.00 for cranes.
|
Keith used a Comp Cams custom hydraulic roller set-up for mine. Runs great, but I don't have very many miles on it yet.
Duration 248/252, Lift .630, Lobe separation 110 Erson Rocker System, Comp Pushrods, Crane Lifters Dan |
I've put in a couple sets now - - they seem to work pretty well...
|
Quote:
duration: 262° Lift:.622" Separation: 112° since 17 000 miles. |
| All times are GMT -7. The time now is 09:43 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: