-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| wrench87 |
11-23-2007 05:27 PM |
fe block hole question?
i bought my 360-390 block bare so i am curious what some of the holes on the pass side of the block are used for?. on the front side of the pass side there is a little pad at the top of the block what is this used for?, and on the pass side near the motormount area there is a hole above the freeze plug what is this hole used for?. any info would be appreciated.
|
| Barry_R |
11-23-2007 06:40 PM |
The hole up front was originally used for generator mounting - and was later used to connect the ground cable.
|
| wrench87 |
11-23-2007 09:00 PM |
thanks barry, that solves one mystery, does any one know what the other hole is for?. also what should be plugged on the drivers side and passangers side pictures would be helpfull for reference.
|
| Woodz428 |
11-23-2007 09:18 PM |
Since you give no casting #s or date of the block, it would probably make more sense for you to post pics of the block with any questions. There are some subtle differences between early and later block, so a pic of yours, would make any replies specificly about your block.
|
| wrench87 |
11-23-2007 09:37 PM |
the block is a 72 360 block
|
| wrench87 |
11-24-2007 03:45 PM |
i found today that the other hole near the freeze plug is like the one at the front of the block, and the other two on the pass side have a 1/4 pipe thread i guss there to drain the block and there is on the drivers side of the block also.
|
| All times are GMT -7. The time now is 04:54 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
