|
FE flywheel bolt pattern
Hi Guys,
another techie question for you. Does anbody know the correct bolt pattern on an FE flywheel/crank? My flywheel from KEP has 2 holes at a slightly different radius from the other 4, whilst my crank (supplied on a built engine from Huddart Engines in the UK) has all 6 holes at the same distance from the centre. No matter how the flywheel is rotated only 4 holes will line up! Which of these is correct for the FE? %/ The flywheel will have to be modified whatever the answer, I would just like to know who has sent the correct spec part? |
All holes on the same circle. One hole is offset though - the flywheel will only locate in one position. You will spend more time than you think finding the "right" spot...by spinning the wheel on the crank.
|
Thanks for that, I knew that if there was an answer to be had then this would be the place to find it. :MECOOL:
That helps out hugely :) Thanks again |
Mark it with a punch, just in case it needs removed for whatever reason.
|
| All times are GMT -7. The time now is 10:37 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: