|
Powermaster Starter for FE
There was an earlier thread started by "HiTech Cobra" where Barry R was going to list the correct Powermaster starter part # for the Shelby/Pond FE using a Quicktime bellhousing. Does anyone have that part number? Thank you.
|
Rodknock ... I recently tried a Powermaster 9506 on my Quicktime bell housing/Ponds block and had a problem as the mounting holes in the three bolt starter flange wouldn`t line up with the mounting holes on the bell housing . Two would , the third wouldn`t . Went to NAPA and pulled an FE starter out of stock and it fit perfectly . I also called Quicktime and they had the same result with a stock FE starter . Looks like to me , one of the "ears" is off several degrees .... not the bell housing .I don`t know if this is one case only , or a series of incorrect flanges .... just an FYI for you . I think the number you want is 9406 , but Barry can verify that for you . My 9506 had what they called the infiniclock feature , which allows you to rotate the starter to fit , unfortunately , the flange had one ear off .
|
Powermaster 9506
I used the powermaster 9506 w/ QT bellhousing. It fit OK. I had to add a shim to get the gear out of the flywheel. It is working fine so far.
|
The 9506 would fit ok .... just that you couldn`t bolt it up as one of the flange holes was off 3/32" , due to what I feel is a manufacturing/QC defect .I`m sending the starter back . I couldn`t get it torqued up to check engagement/alignment . Not really complaining as anyone can have a problem during manufacturing .
|
I only use two holes on my FE hi torque starter and it has worked perfect for years. Contact this guy from ebay he sells an excellent starter for a very good price. The starter is made by a company in California that builds and sells starters for fork lifts.
http://cgi.ebay.com/ebaymotors/FORD-...em140214870483 I have had my starter for over 6 years with no problems. Clois |
If you want an option, the Tilton starter is excellent for FE's.
|
I'm open to all suggestions/options and I appreciate them very much. I want a starter that's reliable and fits. I have a Shelby block with a QT bellhousing.
Do you have a part # for the Tilton? Thanks guys. |
|
| All times are GMT -7. The time now is 11:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: