Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   FE Tunnel Port EFI (http://www.clubcobra.com/forums/fe-talk/90102-fe-tunnel-port-efi.html)

poboy427 08-12-2008 08:40 PM
FE Tunnel Port EFI
 
Does anyone know of a company that has develped a Weber look-alike EFI that will mate to Tunnel Port heads. Thanks for any help.

SoTxButler 08-12-2008 09:51 PM
You might want to check with Paul Swartz at swartzracingmanifolds.com. He built a 3 piece billet manifold for my high riser FE. He can probably modify the head plates if you can talk him into it. Good Luck. Tell him Russ sent you. A couple of pics for you to see his work.

http://i292.photobucket.com/albums/m...nifold/027.jpg
http://i292.photobucket.com/albums/m...nifold/023.jpg

RedCSX1 08-12-2008 11:52 PM
WOW, Very nice.

poboy427 08-13-2008 07:07 PM
It will take probably more than just plate change. The plates would need to be thicker perhaps and would need to have TP tubes would need to be fashioned in so I would think the runner may even need to be bigger,certainly round. I would have to send him my mainforld to pull dimensions from. An even better way would be to send him my block and heads too. I realy don't have the energy anymore.

Now if I had the money to order a new SPF GT40 and build another alum FE I could find the energy real quick!

I really would like to find a piece that was totally sorted out in terms of fit. If off just a hair then the pushrods might rub or oil leak out the back.

Ken Oikawa 08-14-2008 08:29 AM
Here's my setup...
 
http://i114.photobucket.com/albums/n...E/DSCN0037.jpg

Hilborn mechanical converted EFI

poboy427 08-15-2008 06:23 PM
Interesting approach. Looks like the runners from the Ford TP intake were cut at the base and rotated up and welded in. Then flanged and bolted to a Weber style plate.

BossCER 08-15-2008 06:34 PM
Quote:
Originally Posted by SoTxButler (Post 869670)
You might want to check with Paul Swartz at swartzracingmanifolds.com. He built a 3 piece billet manifold for my high riser FE. He can probably modify the head plates if you can talk him into it. Good Luck. Tell him Russ sent you. A couple of pics for you to see his work.

http://i292.photobucket.com/albums/m...nifold/027.jpg
http://i292.photobucket.com/albums/m...nifold/023.jpg
Beautiful piece Russ :cool:

SoTxButler 08-15-2008 07:01 PM
bossCER

That 429 is sure purdy!!!!

Russ


All times are GMT -7. The time now is 01:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: