Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Cammer Weber style Intake (http://www.clubcobra.com/forums/fe-talk/94057-cammer-weber-style-intake.html)

B.M.B.C 01-09-2009 06:30 PM
Cammer Weber style Intake
 
Guys
Is there a weber style intake for the 427 s/o cammer that could be used for TWM injection throttle bodies?

I have seen a car on here somewhere with this type of intake with Webers.

Rick Parker 01-09-2009 06:38 PM
Rarer than Blond Hair in Obama's Family :)

Full Throttle Al 01-09-2009 06:53 PM
Something like this custom made manifold would work:

http://www.clubcobra.com/photopost/d..._Cobra_035.jpg

Alan Sorkey
Shreveport, LA
CSX4083, The Cammer Cobra

Full Throttle Al 01-09-2009 06:55 PM
one of the very few original SOHC Weber manifolds:

http://www.clubcobra.com/photopost/d...Intake_Top.jpg

Full Throttle Al 01-09-2009 06:56 PM
Custom SOHC Weber manifold getting final touches:

http://www.clubcobra.com/photopost/d...05_Feb_015.jpg

B.M.B.C 01-09-2009 06:57 PM
WOW would either of the beauties be for sale, just what im looking for!

B.M.B.C 01-09-2009 06:59 PM
im looking to build all alum cammer stroker tammed with TWM injection .

B.M.B.C 01-09-2009 07:01 PM
Quote:
Originally Posted by Rick Parker (Post 911693)
Rarer than Blond Hair in Obama's Family :)

LOL would that be politically correct at this time ..:LOL:**):LOL:

Rick Parker 01-09-2009 07:05 PM
Nope!..................

B.M.B.C 01-09-2009 07:26 PM
Is distributor unique to the cammer engine, or could a dual sync fe type be used?

Jac Mac 01-09-2009 08:23 PM
Quote:
Originally Posted by Full Throttle Al (Post 911695)
one of the very few original SOHC Weber manifolds:

http://www.clubcobra.com/photopost/d...Intake_Top.jpg
This manifold mounted the Webers cross wise on manifold eg front carb feeds #1-5 then next feeds #2-6 etc.( 58mm with larger c to c dimension of barrel's )

B.M.B.C 01-09-2009 08:35 PM
Quote:
Originally Posted by Jac Mac (Post 911746)
This manifold mounted the Webers cross wise on manifold eg front carb feeds #1-5 then next feeds #2-6 etc.( 58mm with larger c to c dimension of barrel's )
So it would not be suitable for Twm throttle bodies.

Who fabricates custom intakes these days?

csx wnab 01-09-2009 09:06 PM
manifolds
 
Quote:
Originally Posted by B.M.B.C (Post 911752)
So it would not be suitable for Twm throttle bodies.

Who fabricates custom intakes these days?
try www.hogansracingmanifolds.com those guys are one of the best. i know alot of dragracers who use them. i think wilson manifolds also.

xracerbob 01-09-2009 09:14 PM
Hilborn offers a complete fuel injection system for the cammer:
http://www.hilborninjection.com/prod...=343&CatId=176

B.M.B.C 01-09-2009 09:39 PM
Yeah i have looked at them, it was really a Weber style set up i wanted. But looking at the Hilborn system again im beginning to think a 58mm TWM throttle body might just be to small .

Full Throttle Al 01-10-2009 11:57 AM
Hogan's made my manifold pictured above. Had to be reworked due to a bit of a problem with it being too tall but it is perfect now. You might consider buying one of the new SOHC manifolds that are available and rework it to work with Webers.

B.M.B.C 01-10-2009 12:10 PM
Quote:
Originally Posted by Full Throttle Al (Post 911903)
You might consider buying one of the new SOHC manifolds that are available and rework it to work with Webers.
New SOHC manifolds?? where are these at??????? could be interesting

thanks

cobras 01-10-2009 02:04 PM
Quote:
Originally Posted by Full Throttle Al (Post 911694)
Something like this custom made manifold would work:

http://www.clubcobra.com/photopost/d..._Cobra_035.jpg

Alan Sorkey
Shreveport, LA
CSX4083, The Cammer Cobra
THAT has got to be one of the hottest looking motors i have seen.........

almost like looking at a play boy centerfold.....

my hat is off to you sir.... INCREDIBLE MOTOR


All times are GMT -7. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: