|
Edelbrock FE timing cover
Is anyone familiar with an older (I'm assuming) Edelbrock alum timing cover for a FE? I'm watching one on ebay; cast alum that has been polished. Must have been made by Edelbrock some time back, can't find out any other relevant info. Anybody ever seen one? If you look at it on ebay, any ideas as to the cover intended to cover the end of the camshaft? for a cam button or ???
thanks!! http://cgi.ebay.com/ws/eBayISAPI.dll...MEBI:IT&ih=013 |
Ebay link not working. ---you have an item number >?
|
That is isntended to mount a mechanical fuel injection pump driven by the cam.
|
the link you posted doesn't seem to work but from what your describing it sounds like a cover for mechanical fuel injection the fuel pump was driven by the camshaft, hilborn made them, algon made them, to name a few. there is no cover to cover the hole, some were even machined flat on the face to use a motor plate.
Fred |
Ooops, sorry the ebay link didn't work, I should've checked it &/or listed the ebay item number.
Anyway, Fred and Rick, thanks for the input; makes sense that it would be for a cam driven FI pump, which would've been used w/o a water pump on a drag strip car. Even if I were to make a cover plate for the hole over the cam, its probably not feasible for a street driven vehicle using a conventional water pump. thanks again guys! |
ebay item # is 230319860515.
I'd appreciate any thoughts if this cover could be used under a conventional Edel alum water pump if a blank cover was installed over the cam hole. thanks!! |
Are you wanting a stock FE cover ?
I have one if you need it. It's a pain trying to get it centered so it does not leak. (Just thought I would throw that in). :LOL: |
Quote:
|
Hey, funfer2/Kevin......I've got a stock one, just looking for something vintage, but thanks!!
and FWB, thanks for the info on Lee Holman, I'll check it out. to all, thanks for the info!! I appreciate it!! |
| All times are GMT -7. The time now is 01:13 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: