Looking for exhaust gasket for FE
I am looking for the part # for the Remflex exhaust gasket.
I have Edlebrock heads # 6008. Does any know the dimension of the exhaust port of these heads? |
I don't know about the Remflex but I'm running the SCE dead soft copper header gaskets on my KC FE stage IIs. I think Keith starts out with Ebok's bare 427 head (not sure of the number). The SCE fit a stock port well. I had to open them up a little for Keith's CNC'd heads.
jus' curious, why Remflex? BTW... Stage 8 locking header bolts are da bomb for our "self-loosening" headers. Dave |
The Fel-Pro gaskets Edelbrock recommends for that head are #1442 which has a port size of
Port Height (in): 1.400 in. Port Width (in): 2.040 in. So I would say these in Remflex- http://catalog.remflex.com/FORD_Head...t_p/rf3047.htm or, use Nitroseal 95032SG- http://www.network54.com/Forum/74182...rmance+Gaskets |
I have tried the Felpro's that come with the gasket set and I am starting to hear a exhaust leak.
I read on here that the Remflex is a very good gasket and has a 100 % money back guarantee. DO you guys prefer something else? |
Yes, the SCE's that undy suggests. Seven years on one set with no Stage 8 fasteners. Never leaks, never loosens.
|
Damn, I just placed an order with Jegs and they sell SCE
Do you have the part number for FE heads I checked their website but do not see FE gaskets Thanks |
Remflex here, 2 years and 2500 miles. No leaks or loosening yet without any type of locking device.
|
do you have the part number for Remflex for FE header gasket?
|
it's in my post above. Just click on the link.
|
All times are GMT -7. The time now is 03:35 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: