Club Cobra - 427 Pulleys

Club Cobra (http://www.clubcobra.com/forums/)

- FE TALK (http://www.clubcobra.com/forums/fe-talk/)

- - 427 Pulleys (http://www.clubcobra.com/forums/fe-talk/9637-427-pulleys.html)

Hello everyone,

I am trying to find a source for a water pump pulley for my 427. I have the OEM single groove crank balancer and an Edlebrock water pump. I talked to March Machine and was informed that none of their pulleys would work with the OEM balancer. Can any of you help?

Thanks

Don

I bought mine from Ford Motorsports. It is an underdrive pulley system. One of the Ford dealers in my city has a Motorsports store, plus many auto parts stores have the Mototsports catalog.
Jim

Could be a one stop shopping trip for you:

http://gessford.com/cobraparts/fords.htm

Good luck,

Zderf

Don.....
If you read March's comments about not fitting the engines with the pulley as an integral part of the dampner...this means their Crank pulley sets won't work..but their individual pulleys will.
Take another look at thier page

http://www.marchperf.com/pg38.html

I don't use the stock dampners but March does offer the Water pump pulley in two sizes 6 3/4" and 6" diameter. I would measure the Crank (Dampner) pulley you have now and if it's 5.5" then I would try the part number 1912 (6 3/4") Water Pump Pulley or 1552 (6") and also the 137 2 11/16" Alternator pulley. You will need some fasteners that come with the set (1910) and won't come with the individual pulleys. If you need to check this setup just give the "Old One Stop Shopping" place a call (Thanks Zderf) and I'll loan you the ones you need to verify it will work....and the fasteners too....we have some nice round head bolts to handle the "Look"...if the parts don't work the way you want them to...well..... just return them....and I'll sell em to Zderf!
George
george@gessford.com

HEY DON IF GEORGE ANDERSON CANNOT HELP YOU YOU CAN TRY ASP IN STAFFORD TEXAS. WWW. ASPRACING.COM OR CALL 1 281 261 5811 OR 1 2812618845. THEY BUILT ME CUSTOM PULLYS FOR MY CAR. IT IS ALSO SUPERCHARGED WITH A NOVI 2000 THE CRANK PULLEY IS A DOUBLE GROOVED AND CLOGGED THE WATER PUMP IS 5.5 INCHES BUT HAS A DEEP SNOUT TO CLEAR THE SUPERCHARGER BELT THEY ARE ALUMIUM AND BALANCED. HE DRILLED MY CRANK PULLEY FOR BIG BLOCK CHEVY AND FE MOTORS IT IS A CLEAN SET UP IF A CAN HELP YOU, LET ME KNOW GOOD LUCK RICK LAKE RDCOBRA 428 @AOL.COM:) POWER IS YOUR FRIEND BUT TORQUE IS WHAT MAKES YOU MOVE.

George knows what he's talking about. I have bought a few things from George (one being a dampner for my March pulley) and he has always taken care of me. You want find to many guys that knows more about the 427 than George.