-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
Roller CAM -FE
(
http://www.clubcobra.com/forums/fe-talk/97450-roller-cam-fe.html)
Hehehe...and it's got over 10k miles on it. Uber streetable.
|
| blykins |
03-22-2010 02:20 PM |
Jamo, you running that much duration?
Also, what would the solid guys' catch phrase be?
Talking smack with a clickety clack?
|
Jamo, evidently one's definition of "Uber streetable" is not necessary another's... Geez, and I though I wuz a HP crazed maniac.**)
nah... Talking with Pat who has a cam that's flat...
|
| ERA Chas |
03-22-2010 02:36 PM |
Quote:
Originally Posted by Jamo
(Post 1037902)
Undy...those are basically my cam specs.
|
Jamo,
Please share your spring specs and how often you need to change them. I know you drive your car a lot. |
| Excaliber |
03-22-2010 03:03 PM |
My Comp Cam is 282 duration and 571 lift, 110 lobe separation. Nice lumpy idle and decent street manners. WAY better street manners than the solid roller I was running. The springs are what Comp Cam recommended for this profile, I've got 7,000 plus miles on the clock. Most of that is Hawaii "stop and go" hard miles!
|
| blykins |
03-22-2010 03:35 PM |
Quote:
Originally Posted by undy
(Post 1037910)
Talking with Pat who has a cam that's flat...
|
My ace in the holer is one that's a roller. :D |
Quote:
Originally Posted by blykins
(Post 1037906)
Jamo, you running that much duration?
Also, what would the solid guys' catch phrase be?
Talking smack with a clickety clack?
|
Just a smudge less than Undy's dream motor...270 @.050 on both ends. Just shy of 11 to 1. |
Quote:
Originally Posted by ERA Chas
(Post 1037912)
Jamo,
Please share your spring specs and how often you need to change them. I know you drive your car a lot.
|
Can't find the sheet on the springs, but no changes made thus far. |
| All times are GMT -7. The time now is 02:21 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
