|
Headlight orientation
I am about to mount the Lucas headlight I purchased from Finish Line. With the bulbs in place, text in the upright position, the cable exits the rear of the shell from the top. This seems backwards as moisture could run down the cable and in to the shell. Is this correct? Should the bulbs be upside down? Do I have them assembled incorrectly?
Any help is appreciated. Thanks |
Being that you are in the States and drive on the right side of the road, run wires to the light and when you light the low beam the beam should angle , down and to the right, and on high beam straight ahead. The wire should run through a grommett which will prevent moisture from getting in.
|
| All times are GMT -7. The time now is 09:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: