Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Finish Line--- Speak with Paula & Enzo (http://www.clubcobra.com/forums/finish-line-speak-paula-enzo/)
-   -   Everett-Morrison ?'s (http://www.clubcobra.com/forums/finish-line-speak-paula-enzo/14824-everett-morrison-s.html)

hdheritage97 02-20-2002 07:01 PM
Everett-Morrison ?'s
 
Enzo,

I see that you have an E-M car. I have a couple of questions regarding them that maybe you could help me out with. I have an old kit, around 86, and I'm having a tough time finding tires that won't rub in the rear. The guy I bought it from set the car up with a Ford 9" IRS setup. I'm running 295/50/15's back there and the drivers side hits on the inside of the tire and the passenger just touches near the front of the fender well, only when I'm driving. It appears to have plenty of clearance sitting in the garage but when I take it out, it hits in those two spots, any ideas on tire sizes or what I should do to try and correct that issue.

I'm also wondering what the correct way to mount seat belts would be ? E-M says to just bolt them through the fiberglass panel between the seats and the trunk. That just doesn't sound right to me, what do you think about that ? I would like to get one of your oild cooler kits. What would I need to make it like the originals, I'm running a 427 SO Tunnel Port engine, and do you have the aluminum panels to fit the E-M cars, for the inner nose area ? Oh yeah, before I forget, my car has this weird sort of hump in the tunnel, it juts out towards the drivers seat. When I had it up on the lift, I didn't see any reason to have it, I'm using a toploader. Any idea why it's there and most of all, any reason NOT to remove it ? I have some nice leather seats I'm going to install and this hump would really throw a wrench in the works for that. I'm also looking for some good quality carpeting to finish my interior, any recommendations there ?

Thanks for your help,

Cliff

Enzo Alibrandi 02-21-2002 06:37 AM
Cliff,

I'm here looking at the e-mails and Enzo isn't here right now. Please call him on the toll free number this afternoon at 888 436-9113 and he'll help you out.

Regards,

Paula

Hotfingrs 02-21-2002 06:56 AM
Cliff, please post what you find out, I'm interested as well


All times are GMT -7. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: