Club Cobra - For Sale: Mass FLO EFI 4-Barrel EFI Setup

Club Cobra (http://www.clubcobra.com/forums/)

- Fuel Injection & Tuning (http://www.clubcobra.com/forums/fuel-injection-tuning/)

- - For Sale: Mass FLO EFI 4-Barrel EFI Setup (http://www.clubcobra.com/forums/fuel-injection-tuning/110797-sale-mass-flo-efi-4-barrel-efi-setup.html)

For Sale: Mass FLO EFI 4-Barrel EFI Setup (Large Price Reduction)

Includes a Mass Flo 4-barrel throttle body, proprietary Mass Flo mass air meter, Mass Flo computer and Mass Flo Chip. It is calibrated for 36# injectors, has a 7500 RPM rev limit, and a re-calibrated timing curve. Can be re-calibrated for different injectors, rev limit, etc by removing the chip and sending it to Mass Flo. Will also send stock 02 sensors and barometric pressure sensor with it. These parts are essentially new. They have maybe 30 minutes run time on them. Everything works perfectly. $1100. Price now reduced to $900. This also includes the correct distributor for this system (for a 302, will have to get a different distributor if used on a different engine), and an SX Performance fuel pressure regulator (part number 15402) with fittings. This price is an absolute steal for these parts! Enjoy!

Thanks,
Tom

http://i.imgur.com/1oGSv.jpg

http://i.imgur.com/XDMMq.jpg

http://i.imgur.com/vsk5M.jpg

http://i.imgur.com/XlwCz.jpg

http://i.imgur.com/3vneO.jpg

http://i.imgur.com/SlJJ6.jpg

Why are you getting rid of the Mass Flo system?

Hi,

The car has slowly de-evolved to a drag-car. I am nearly finished with a stoker windsor that is around 15:1, so all street driving is out the window now.....going to a carburetor.

Thanks,
Tom

Where is the wire harness

I was using a stock EEC harness, I sold it on the NMRA site.

Thanks,
Tom

did you ever sell this item

Quote:

Originally Posted by kenneth robins (Post 1222483)

did you ever sell this item

Kenneth,

I note this is your first post. Welcome to CC.

I don't want you waiting indefinitely for an answer only to feel that CC members are snubbing your query. BUT, you'll find that you've revived a thread that's a year and half old. Further, tal362 has only 3 posts and his last activity was on 06-14-2011, SO I doubt you'll get an answer. :o

Kindest regards,