|
Roush 427 IR need new idle control valve part no?
I have installed the Roush 427 IR on my Shelby Coupe.
Now i like to change the ide control valve. Do you now what part it is? From Mustang? Thanks Axel |
If my memory is correct the Roush units are made by Borla.
The IAC PN is 205038 http://www.roushperformance.com/engi...structions.pdf http://www.borlainduction.com/media/...duction_V8.pdf |
http://www.clubcobra.com/forums/pict...=15978&thumb=1 http://www.clubcobra.com/forums/pict...=15977&thumb=1
Here pics of my engine, the air control value i need is under the 2 fuel rails |
I can't see it but that location is next to the throttle bellcrank. They may be using a simple solenoid to step up the idle for A/C and power steering loads.
Best to give Roush a call. They are East Coast based. You are +6 on time zone to them. 1-800-59-ROUSH |
|
IACs are stepper motors -not solenoids.
-- you need to know what Vintage of 427IR this is, as Roush has changed suppliers many times over the years. Be prepared with your #SN and call mark yagelo - |
Quote:
Brilliant observation, and that's why I used a different nomenclature when referring to a different type part. Contact info for Mark Yagelo: 734-779-7243 mark.yagelo@roush.com. |
Iac
Not sure how your IAC is set up on the intake, but I just did an install on an 8 stack system and used a remote IAC valve that I mounted to the firewall. It was just a simple matter of running the vac line and the wiring to the remote IAC. This particular IAC stepper motor is the same that is used on a
Chevrolet LS-1 Engine so they are commonly available. I purchased my Remote IAC on E bay. Just a thought but from looking at that rousg set up it would be a pain pulling all the fuel rails just to change the IAC. Good luck |
| All times are GMT -7. The time now is 09:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: