|
Standard 302 injection...any good?
1 Attachment(s)
The setup in the picture. Is it any good? we don't know too much about this in the UK.
I'm not after the ultimate in power, rather shoothness, reliability and economy. Any advice much appreciated. Thanks Simon |
It's a good reliable system with lots of stuff avail in the aftermarket to upgrade.
Ray |
Fi
Looks like basic 5.0 gt stuff which is good reliable stuff. Your missing the Computer, Mass air flow sensor, and the thick film distributor. Oh do you have the harness. Good luck
later dennis |
Thanks guys,
I'm missing all those parts including the loom. Maybe I should give it a miss as getting those bits over here will be really difficult. Simon |
You will also need a 5.0 gt electric pump. All these parts are readily available in the U.S. cheap. Now is the time to make some friends and start shipping parts. Check some of the slavage yards that deal in mustang parts and tell them to ship. There sa big one in Windsor Georgia just can't remember the name. Good luck
later dennis |
Look for a A9L ECU from a 90 & up mustang then you can use MassAir, check F-150 ford truck & Vans for the inline pump there around 190 LPH pumps, any EFI mustang will have
A simple harness it will be a little neater.. Later if you need to make a little more power your set for cam , injectors, and a Tweecer to tune the ECU.. |
| All times are GMT -7. The time now is 06:29 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: