|
damn if I had the cash I'd be in for 351w buy. With stocks sucking, real estate sucking, oh and twin boys due in a few weeks I'm definetly out. Ask me again next year :D
|
dlang, I understand fully, that is the reason I am doing this. After the election everything will turn around, it usually does, they do manipulate us. Thanks for the interest, Al
|
Hey this looks good I might be in for a 351 kit any orders yet?
Quote:
|
buyers
Rick, One guy right now!
|
I might be interested too.
I'm just talking to engine builders right now and I want a stack system. Mike (my post count is so low as I'm usually on ffcobra.com) |
Al, can you give me a apx.,... total cost for a FE ?
Injectors F.A.S.T system Pumps ect. Ready to run. Thanks |
What all is included in this kit????
TWM Induction Kit: Ford 289/302/351 List $3,995.00 YOUR PRICE: $3,395.00 |
TWM pricing for Ford small block
Earl, A group purchase would result in a $697.50 savings from pricing below!
Thor Motorsports Competition Fuel Injection Systems and accessories Al Wohlstrom 7890 East Starbright Court Tucson, Az 85750 Cell 520-401-9142 thormotorsports1@msn.com www.thormotorsports1.com Re: TWM injection for 351W Ford 351W Ford application includes four 50mm two barrel throttle bodies, manifold, manifold mounted linkage, vacuum plenum, fuel rails, TPS, and air horns. Retail $3,995.00 your price $3,395.00 F.A.S.T. XFI ECU, wiring harness and O2 sensor 2,190.00 F.A.S.T. injectors 42 lb/hr 650.00 MAP, water, and air sensors 110.00 Aeromotive fuel pump, and filter 450.00 Throttle cable 105.00 Shipping 75.00 Total $6,975.00 Optional nostalgia air horns with screen filters $400.00 Optional IAC (idle air control) $249.00 Optional screen with foam filters for standard air horns $187.00 Optional polishing of manifold, throttle bodies, plenum, linkage, air horns & fuel rails $1,650.00 About 3 to 5 weeks backlog. Optional air cleaners K&N filters are $400.00 I require 50% deposit to place the order an 50% when the order ships. I take Master Card & Visa. Thanks, Al |
TWM pricing for Ford FE
Kevin, A group purchase would represent a $765.00 savings from the pricing below.
Thor Motorsports Competition Fuel Injection Systems and accessories Al Wohlstrom 7890 East Starbright Court Tucson, Az 85750 Cell 520-401-9142 email thormotorsports1@msn.com Thor Motorsports - TWM Induction Authorized Dealer - Competition/Street Fuel Injection Systems and Accessories Re: TWM injection for 427 FE Ford 427 FE Ford application includes four 58mm two barrel throttle bodies, manifold, manifold mounted linkage, vacuum plenum, fuel rails, tps, regulator, and air horns. Retail $4,785.00 Your price $4,065.00 F.A.S.T. XFI ECU, wiring harness and O2sensor 2,190.00 F.A.S.T. injectors 42 lb/hr 655.00 MAP, water, and air sensors 110.00 Aeromotive fuel pump, and filter 450.00 Throttle cable 105.00 Shipping 75.00 Total $7,650.00 Optional Nostalgia air horns with screen/foam filters $400.00 Optional screen with foam air filters for standard air horns $187.00 Optional IAC (idle air control) $249.00 Optional polishing of manifold, throttle bodies, plenum, linkage, air horns & fuel rails $1,650.00 We require 50% deposit to place the order an 50% when the order ships. I take Master Card & Visa. Thanks, Al |
Ecu
I also have a new ECU that can be used with either one of these setups without all of extra bells and whistles (NOS ect.) for $1,625.00. Very user friendly and great for street use.
|
Al,
I already have 42lb. injectors, an aeromotive in tank pump and filter, and a Micro Tech ECU. I am running Twin Garrett Turbos on a 5.0 with E303 cam and Y303 heads. SO, would I need to ditch this stuff or could your system, less the parts above, be used?? Thanks, Earl |
Earl, I believe that the ECU would work, (you may want to talk to Microtech about that) and I would need a part # for your injectors. I take it that you have a return line already? If the ECU, injectors and pump/filter work, then all you would need is the TWM and whatever sensors you dont have.
|
Al, how much longer will you be running this special?
|
I need to have 5 or more orders filled by March 15, 2008
|
Al, I have a Superformance with 460. does your system have provisions for power brake booster and PCV valve. also what would a ball park price be for a complete system.
Mel |
TWM 460 Ford pricing
Mel, A group purchase would result in a $825.50 savings from pricing below!
Thor Motorsports Competition Fuel Injection Systems and accessories Al Wohlstrom 7890 East Starbright Court Tucson, Az 85750 Cell 520-401-9142 thormotorsports1@msn.com Thor Motorsports - TWM Induction Authorized Dealer - Competition/Street Fuel Injection Systems and Accessories Re: TWM injection for 460 Ford 460 Ford application includes four 58mm two barrel throttle bodies, manifold, manifold mounted linkage and vacuum plenum, fuel rails, TPS, regulator, and air horns. Retail $5,500.00 Your price $4,675.00 F.A.S.T. XFI ECU, wiring harness and O2 sensor 2,190.00 F.A.S.T. injectors (size determined by application) 650.00 MAP, water, and air sensors 110.00 Aeromotive fuel pump and filter 450.00 Throttle cable 105.00 Shipping 75.00 Total $8,255.00 Optional screen/foam air filters for standard air horns $187.00 Optional nostalgia air horns and mesh and foam filters $400.00 Optional IAC (idle air control) $249.00 Optional polishing of manifold, throttle bodies, plenum, linkage, air horns, and fuel rails. $1,650.00 We require 50% deposit to place an order, and 50% when the order ships. We take Master Card, and Visa. Thanks, Al |
Brake booster
Mel, The brake booster vacuum pickup is shown below. I'm checking into the pcv.
|
I don't have a clue what happened to the attachment, click this link. TWM Induction - V8 Kits
|
Deadline for group purchase
I need to have 5 orders for complete setups ( TWM induction, injectors, fuel pump, filter, ECU, etc.) in by March 15, 2008 to take advantage of the 10% overall discount. I don't believe this will be offered again this year.
|
Al, thank you for the reminder.
I was meaning to ask an FE-related question. Is there a picture comparison of standard versus nostagia air horns? I'm trying to figure out what the appearance of the standard air horms, which I believe comes with the $7,000 ($7,650 less $765) package versus adding another $400 for the nostalgia air horns. Also, if a buyer went with the nostalgia air horns, is there a 10% price break on the option(s)? Thank you. |
| All times are GMT -7. The time now is 06:06 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: