-
GT40 Talk
(
http://www.clubcobra.com/forums/gt40-talk/)
| jpfletch1 |
07-17-2010 10:52 AM |
1 1/4 inch aluminum T
My project is stopped because I can not find a 1 1/4 inch aluminum T for a water manifold connecting to my webers. Does anybody know where I could find this piece. I do not have the ability to weld aluminum or I would make it myself. Thank you jpfletch@pacbell.net |
Quote:
Originally Posted by jpfletch1
(Post 1065303)
My project is stopped because I can not find a 1 1/4 inch aluminum T for a water manifold connecting to my webers. Does anybody know where I could find this piece. I do not have the ability to weld aluminum or I would make it myself. Thank you jpfletch@pacbell.net
|
try here.....
http://www.mcmaster.com/#aluminum-pipe/=804xfm |
| Jerry Clayton |
07-17-2010 01:17 PM |
also look at stainless steel pieces
|
| Jac Mac |
07-17-2010 01:55 PM |
I see blue thunder sell this proper piece for SBF, is that what you want one for...or another application.
I was just on the Ford 'Y-Block' site & they have a pic in the SBF Weber manifold section..
|
| Rick Parker |
07-17-2010 02:10 PM |
|
| mickmate |
07-17-2010 07:13 PM |
I can make it if you can't find it anywhere from the leads given.
|
| jpfletch1 |
07-18-2010 08:03 AM |
Quote:
Originally Posted by Rick Parker
(Post 1065315)
|
It is on a 302. I am going to post a photo later today. I have seen your set up before but what are the 4 tubes for ? Thanks Jim |
| Rick Parker |
07-18-2010 09:27 AM |
This manifold design incorporates a fuel distribution block. Others just run a single line from the pump then in series to each carb. Used on 289 Cobra.
|
| Jac Mac |
07-18-2010 12:31 PM |
From what I understand this is for an ERA GT40?, & these cars per the ERA info have the coolant going from the outlet or T/Stat via this 'Tee' into the bottom of the header tank which appears to be mounted on the RHS firewall-beside #1 plug-. The 'Tee' is mounted between the water outlet & header tank & is also attached to the pipe going fwd to the radiator. Therefore the 'Cobra' type water neck will exit on the wrong side.
JP Fletch also posted this enquiry on GT40's, I was able to attach a dwg on that site, it wont upload here for some reason..
If Im correct he wants a simple single barbed 'Tee' fitting in alloy to suit a hose with 1.25" bore
|
| jpfletch1 |
07-18-2010 07:34 PM |
Correct, I could not have said it better myself. Thanks everyone
|
| jpfletch1 |
07-19-2010 09:07 AM |
1 Attachment(s)
[ATTACH] Attachment 16962
HELP Here is the fitting I need for my ERA gt40. It is a 1 1/4. Does any one have this or know where to get it. Thanks |
| strictlypersonl |
07-19-2010 10:17 AM |
Have you called ERA (since we make that here?).
|
| All times are GMT -7. The time now is 09:33 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
