Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   GT40 Tech Talk -- MK1 - MKII - MKIII - MKIV (http://www.clubcobra.com/forums/gt40-tech-talk-mk1-mkii-mkiii-mkiv/)
-   -   ZF Trans parts (http://www.clubcobra.com/forums/gt40-tech-talk-mk1-mkii-mkiii-mkiv/93181-zf-trans-parts.html)

Jim Holden 11-21-2008 12:19 PM

ZF Trans parts
 
Folks:

Repeateed e-mails and calls to RBT gets no response. Is there any other source for ZF trans parts? I need the "o" ring gasket for the shift shaft into the trans.

Jim Holden

Bobcat 11-21-2008 03:05 PM

Hey Jim .... I know nothing about ZF transmissions , but if it is just an "O" ring , you might be able to match it up at a local Mill Supply house or with someone who represents/sell Parker "O" rings . If you can get it out , they should be able to get the cross section and diameter . Durometer is something you might have to guess at . Most of those places also carry metric stuff . Maybe consider going to Viton if temps are a problem . Do NOT go to Teflon as it has no memory and will cold flow on you .

Tony Ripepi 11-22-2008 04:45 AM

Hi Jim,

Try here: http://www.panterasbywilkinson.com/w...ore/store.html

Steve built my GT40 and he has a huge inventory of ZF/RBT parts.

TR

Jim Holden 11-24-2008 08:15 AM

Thanks guys.

Jim

Don 11-24-2008 08:35 AM

Jim.....if still looking, try McMaster-Carr, but would need to order by size, etc

E-Mail
chi.sales@mcmaster.com

Sales and Customer Service
(630) 833-0300
(630) 600-3600


http://www.mcmaster.com/


All times are GMT -7. The time now is 10:17 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: