|
You did the same thing I did with the safety wire around the wheel. I don't know what you used but I stripped the insulation off a piece black wire from a chunk of 14ga romex cable (house wiring).
|
Jeff,
Nice colour on the wheels. Is that a satin dark grey? Any more detail on the paint colour? (I'm thinking ahead). Cheers! Glen |
1 Attachment(s)
Think the wheels are flat black powder coat. Craig may know as this was done pre-Bill.
My plan, CRAZY! Going to sand blast the face of the wheels and make the centers gold so the earlier race car comes out. Here is an example CSX3028, this is the look I will chase... On my Gold car the wheels are oiled Magnesium so brake dust, oil and oxidation in color. :rolleyes: |
Use CRC Gasket remover to strip powdercoat... no sandblasting !!
|
1 Attachment(s)
Nah
I want the texture, stripper messy and will not give the look I am after... |
1 Attachment(s)
Finally found the steering wheel center.
Now on to the wheels ...... and Tires |
Oh damn.... The patina'd 16 split is the proverbial icing on the cake! Beautiful!
|
1 Attachment(s)
Well, wheels are in process.
Hoping to get them back in car next week so it can get back up and running. |
1 Attachment(s)
New sneakers mounted
|
Those wheels are absolutely lovely.:cool:
|
Great job Jeff!
Patrick - you could do that too. Gold centres on your wheels with beige? Nice ;) |
Quote:
http://www.clubcobra.com/photopost/d.../newheels1.jpg http://www.clubcobra.com/photopost/d.../newheels3.jpg |
1 Attachment(s)
Sneak peak.....
Nope it’s in the air, not jacking up for converting to 4x4 |
1 Attachment(s)
Rears on......
Gonna shoot for weekend to get back on ground. |
I like all of the black, very nice car
|
Yeehaw!!
Great ground clearance for the New Hampshire snows, Jeff!
|
Everyone has to have a snow Cobra up here! :p
|
1 Attachment(s)
Ok
Finally on the ground. Running well, alignment this weekend. Also small details all around. This weekend is weather positive so yeah |
Oh yah!
Lookin' sweet, Jeff! Love the billboards look...
|
2 Attachment(s)
Ok
Another detail change. Can you spot the NOS part ?? |
| All times are GMT -7. The time now is 09:07 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: