Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Holley Tuning (http://www.clubcobra.com/forums/holley-tuning/)
-   -   Anyone else having trouble with the Holley blue gaskets? (http://www.clubcobra.com/forums/holley-tuning/104227-anyone-else-having-trouble-holley-blue-gaskets.html)

pusherfans 04-28-2010 05:13 PM

Anyone else having trouble with the Holley blue gaskets?
 
I keep having to replace mine each time I open it up, or every other time. They seem to leave little blue bits behind. Very, very tiny, like blue dust, but big enough to notice. When I open a new package, I have to "clean" them off. They are very "fiberous".

Anyone else notice this? is there a better alternative brand to use?

DAVID GAGNARD 04-28-2010 06:55 PM

Been using them for years and years and have never had any problems, after a number of "takedowns" they will shows signs of breaking down, but I've had some last 10 years....
Will not use anything else on my carbs.....

Maybe your set had been on the shelf too long?????????

David

pusherfans 04-28-2010 07:04 PM

It's possible, but they're from Summit Racing and they turn over their stock. Also, this is not 3 different sets so far. I just ordered another. . . . we'll see.

CobraEd 04-28-2010 07:04 PM

I agree 100% with David. I have had the exact same experiences with them.


.

vector1 04-29-2010 03:04 AM

i came across a recommendation somewhere to put chapstick on the gaskets and it is supposed to help them not stick.

DON BEVERS 04-29-2010 08:22 AM

Dave Braswell here in Tucson has gaskets which are graphite imprenated. They have a silver appearance. We use them on the race car and they don't stick or leave residue behind. With O2 sensors in every pipe, the carbs are apart alot. Phone is 520-579-9177. If they answer as POW engineering, don't hang up. POW is what Dave calls the business.

joyridin' 05-02-2010 06:57 AM

I gave up on the Holley brand of gaskets. The last time, I went on Ebay and bought AED brand. I think I've had the float bowls off a dozen times and I am still using the same gasket.


All times are GMT -7. The time now is 06:11 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: