Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Holley Tuning (http://www.clubcobra.com/forums/holley-tuning/)
-   -   Holley install (http://www.clubcobra.com/forums/holley-tuning/146305-holley-install.html)

Brian Proctor 10-18-2022 02:13 PM

Holley install
 
Hi guys,

I am contemplating fitting my Holley 1750s in the reverse direction on my SBC i.e. throttle linkage on the right when viewed from rear of engine. I am having problems with sticking throttle cables, right hand drive, sharp turns on cable.
Will this cause any problems with carburation,

Thanks in advance
Brian

CHANMADD 10-18-2022 02:17 PM

You will have make sure there are no Jet extensions on the secondaries if you flip, and then you will need them in the primaries.


All times are GMT -7. The time now is 04:35 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: