|
Like to Introduce myself
Johnex 3 Motorsports
www.johnex3motorsports.com I would like to address any questions or concerns with Johnex products and help previous customers of Johnex if I can. Please email me central@niagara.com and please visit my website Thank you Anthony |
new cobra manufacturer?
Are you the same company as the Johnex that built cobras for House of Cobra?
|
Hello Anthony
Hi,
My name is Bob Holdridge. I built harnesses for John Levelier for several years. I was in Wisconsin then. I am now in Northern Ohio. I still have stock if you are ever in need. |
Does anyone know if Anthony is still around or if there is another source for parts. I am in a bad need for a front lower a-arm on my 95 Johnex Cobra
|
Read this post about Anthony; it might answer part of your question.
http://www.clubcobra.com/forums/coup...ml#post1127897 Sorry, I don't have any info about lower A arms that were used on his kits. Hopefully a fellow Johnex owner can chime in and help you there. |
Actually I contaced a company named CSC and they made the frame and chassis components. I also did contact and hear back from Anthony at Johnex. I think I can get a complete front suspension if I need it. I must say this about the old Johnex cobras... the frames are bullet proof. Due to my own fault my car fell off the back of a trailer and only the lower a-arm was damaged.... the frame is fine. Thanks for responding to my post.
|
SunDude thanks for the link and info on Anthony.... WOW is all I can say. I did talk to him and he seemed ok....... Well it appears I can get parts from CSC so my plan will be to buy from him. m I love my Johnex the pain in the butt is no knowing what parts they used.
|
Ralph at CSC will look after you. He is a good guy & honest to boot.
Unlike the other person you were in contact with. Craig |
Thanks CDNUS I am in with him then. Ralph has worked with me with the other person has not helped at all.
|
Does anyone know where I can get a pair of the side vents/louvers for the Johnex Body? I can't seem to find them anywhere and the ones from Finish Line don't fit. The body I have is the inner bevel side louver design.
Thanks in advance |
See above
Ralph at CSC is still a nice guy and still honest. Give him a call. 😊 Craig |
I am considering buying what I believe is a Johnex complete minus engine and trans.
I recently purchased a 67 mustang fastback as a restore product from an older gentleman and in the stall next to it was a beautiful Cobra. He has yet to dig up the paperwork on it. From what I am gathering, he purchased from House of Cobra in Southern Cal in early 2000’s. They attempted to put a 351C with auto in it, as he is an amputee and it did not work. He is telling me it must have a Windsor. The car is beautiful and has been garaged under a cover. Has never had a motor. Just looking for information as there is not a lot I could find on this. Anything is appreciated. Thx |
I suggest you find out what your state will need to title/register the car and be sure you can get it before you spend money on the car.
|
Thank you
|
Quote:
Also, start a new thread of your own instead of resurrecting a 10 year old thread from the archives.%/ Bill S. |
| All times are GMT -7. The time now is 04:44 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: