| Keithc8 |
05-10-2004 09:46 PM |
Genesis blocks in stock
We have some really nice cast iron Genesis blocks in stock ready to be machined for you. These blocks can be bored to 4.310 and still have plenty of cylinder wall thickness left. We have several of these blocks on the street running right now with great results and running nice and cool. When you buy a block from us it is fully gauranteed to be pressure checked and ready to machine or we can machine for you. The blocks as cast with the final machining still to be done are 3295.00 and we will finish complete where they are ready to assemble at 3995.00. Give us a call with all of your FE needs. No one delivers the power and performance at a great price like we do. Thanks Keith Craft
|
| All times are GMT -7. The time now is 06:08 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
