Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Kirkham Motorsports (http://www.clubcobra.com/forums/kirkham-motorsports/)
-   -   Are there any Kirkham Build threads?? (http://www.clubcobra.com/forums/kirkham-motorsports/107207-there-any-kirkham-build-threads.html)

RestoCreations 10-12-2010 01:25 PM

Are there any Kirkham Build threads??
 
I just looked back to 2005 in this forum and did not find a single build thread.

Does anybody have a build thread elsewhere or perhaps a photobucket album play by play of their build?
Thanks

Three Peaks 10-12-2010 01:57 PM

David has a Kirkham assembly manual on line. It has been invaluable in my build.

Here is the link to it http://www.clubcobra.com/forums/show...t=wiper+wiring

RodKnock 10-12-2010 02:12 PM

I would venture to say that nearly all Kirkhams are purchased as rollers (complete sans engine and tranny), so I don't think there are any build threads.

mickmate 10-12-2010 03:31 PM

Apparently some people venture information without reading the previous post.
Chris if you go on youtube and do some searches of Kirkham you will find some good stuff also.
http://www.youtube.com/results?searc...bra+build&aq=f

RodKnock 10-12-2010 03:43 PM

Quote:

Originally Posted by mickmate (Post 1083503)
Apparently some people venture information without reading the previous post.
Chris if you go on youtube and do some searches of Kirkham you will find some good stuff also.
http://www.youtube.com/results?searc...bra+build&aq=f

I've read it, but I do appreciate you pointing it out for me. :rolleyes:

I should have added "besides the Kirkham factory's build thread." I thought the OP meant Kirkham owner-build threads.

Most Kirkham owners purchase rollers and, so there are very, very, very, few Kirkham build threads. How's that? :p

RestoCreations 10-12-2010 04:20 PM

Thanks for the replies! I have been over the Kirkham assembly manual, but it seemed incomplete. Perhaps i simply don't understand just how assembled the kirkham rollers come from their shop. The suspension will be a very quick assembly. It only took me about 20 minutes per side to disassemble it. Im assuming it will take me about an hour per wheel to put it together since i will not be installing it as a full unit, as i removed it. I'm really not concerned about the build, I really just wanted to see more pictures of builds, mostly the engine compartments, fuel lines, brake lines, driveshaft, transmission, shifter, parking brake handle...

*13* 10-12-2010 09:02 PM

Donate a Kirkham my way & I'll do a build thread!!:p


All times are GMT -7. The time now is 02:45 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: