|
Kirkham alignment specs
I understand the front specs are -1/2 degree camber, +3.5 degrees caster, and 1/8" toe at 24", but what about the rear? Does -1/2 degree camber and zero toe make sense? This is for a street driven 289 fia car. Thanks!
|
I can hunt down my 427 alignment specs if you think they would help you and your 289 FIA.
|
Here's what's on the KMS site:
Alignment specs Street Ride Height, Front 4.5" Ride Height, Rear 5.25" Caster Front 3-4° positive Camber, Front -½° Camber, Rear -½° Toe, Front 3/32" toe in w/radial tires Toe, Rear 3/32" toe in w/radial tires Tire Pressure 30 psi. Larry |
Thanks, that's sounds good and is what I will go with.
|
| All times are GMT -7. The time now is 06:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: