|
Ignition switch
I have KMP 631, built and delivered circa April 2010.
I have been having erratic gauge behavior and I think its due to intermittent power from the ignition switch post. Anyone have info on the switch and or a vendor to obtain a new one? TIA |
Foghorn,
KMP600 here. About 2 years ago my electrical quit (only breakdown in 12 years). The internals of the switch got sloppy. I had to reach under the dash and clock the ignition under tension for the remaining ride home. Replaced it with Napa KS6180 and been fine ever since. Of course you'll get a new set of little toy keys :JEKYLHYDE |
| All times are GMT -7. The time now is 12:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: