Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Kirkham Motorsports (http://www.clubcobra.com/forums/kirkham-motorsports/)
-   -   Glove box in a KMP (http://www.clubcobra.com/forums/kirkham-motorsports/52678-glove-box-kmp.html)

Lew Ledyard 04-14-2004 06:58 PM

Glove box in a KMP
 
Has anyone installed a glove box in their Kirkham? Is this difficult to do? I know that it is not exactly stock with an S/C type dash, but there are a lot of things about my car that are not exactly stock.

Thanks

David Kirkham 04-14-2004 08:43 PM

I haven't heard or seen one. We have one in our 289 street car, but it is far from complete.

Please let me know if you find out some more info.

David:) :) :)

bbrown 04-16-2004 01:49 PM

I'm putting one in my 289, Lew. I have the pieces made and covered, but not installed yet. I am installing a street 289 dash and I started from scratch.

It is a fair amount of work. I have access to various CSX 289 cars so that was my starting point for dimensions, etc. I had to make a hammer form to form the lower edge, the steering column hole and the glove box hole. The glove box proper has to be formed from sheet aluminum and fastened to the dash and the footbox.

If you are starting with an already made dash, check to make sure the aluminum is not "hard". I used 3003 and annealled the sections I formed. Some people don't bother with the annealling. I'm not sure what alloy Tom and Dave are using for their dashes. It's probably better to start over and keep the original for a pattern.

Not sure if I really helped you at all. Good luck.
Bert Brown


All times are GMT -7. The time now is 02:46 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: